Solidur | Tree Climb Chainsaw Climbing Boots Class 2

Climbing boots with chainsaw protection and SRT in mind.

The Solidur Tree Climb is a chainsaw climbing boot built for arborists. Its slim, tapered shape moves easily through branches and crotches, and the Vibram® Winkler sole gives precise footing on the tree.

Through-holes in the sole let you thread a rope or Dyneema® loop for SRT foot ascending, without damaging the upper or losing grip. You can resole the boots to extend their life.

If you climb for a living, the Solidur Tree Climb is a strong fit.

Key Features

• Class 2 chainsaw protection (24 m/s)
• Easy Climb sole with through-holes for an SRT foot loop
• Vibram® Winkler outsole for grip and control
• Perwanger® cowhide, 2.2 to 2.4 mm, water- and abrasion-resistant
• Padded Cordura® and stretch neoprene
• Flat eyelets that won't snag
• Protective toe cap and rubber stone guard
• Resoleable
• Weight: 1.79 kg (size 42)
• Front height: 18 cm

Protection & Standards

• EN ISO 17249:2013, Class 2 (24 m/s)
• EN ISO 20345:2022 + A1:2024, SB PL E FO WPA WR HRO CI
• Toe cap tested to 200 J impact and 15 kN compression
• PPE Category III

Chainsaw protection is rated by chain speed: Class 1 is tested at 20 m/s, Class 2 at 24 m/s and Class 3 at 28 m/s. Not sure which class suits your saw? Bring it in to Mower City Albury, and we'll check it with you. Dyneema® foot loops (Solidur ref. TCHL) are sold separately.

Size chart

Sizes are European. Use the table below, or come in to Mower City Albury and try them on.

Care: Wipe clean with a damp cloth and let dry naturally, away from direct heat.